Top 10 Rotor Truing Tool UK – Hand Tools

As an Amazon Associate I earn from qualifying purchases.

1. Park Tool

#ad

Rotor Truing Fork Tool, Park Tool DT-2

#ad
Park Tool #ad - Compatible with any size and make of disc rotor. Model number: 134513. International products have separate terms, age ratings, including fit, and language of product, are sold from abroad and may differ from local products, labeling or instructions. Centre handle is vinyl dipped for extra comfort.
BrandPark Tool #ad
ManufacturerPark Tool #ad
Height2.54 cm (1 Inches)
Length25.4 cm (10 Inches)
Weight0.18 kg (0.4 Pounds)
Width10.16 cm (4 Inches)
Part NumberQKDT2C
Model134513
Warranty1 year manufacturer

2. CYBTM

#ad

Bike Rotor Truing Fork Wrench Disc Brake Correction Brake Pads Gap Regulator Rotor Truing Alignment Tool

#ad
CYBTM #ad - The wrench has three opening design15mm/18mm/42mm corresponds to most disc brake rotors and serves its purpose of keeping your rotors aligned. Adjust the position of the brake clamp to prevent scratching the brake rotor. The gap regulator pads is very easy to adjust the gap between the brake pad and brake rotor. Small size, light-weighted, easy to carry and storage. Simply put the outer sleeve of the wrench on the steering tube, align it with the positioning pin part of the steering tube, lower the flower nut, and then hit it with a rubber hammer.
BrandCYBTM #ad
Manufacturerfengying #ad

3. WANGCL

#ad

WANGCL Bike Disc Rotor Alignment Tool,Rotor Truing Fork Bicycle Brake Wrench for Bike Alignment

#ad
WANGCL #ad - Ideal for DIY work lovers. A great gift for your friends and family. The adjustable wrench is made of stainless steel, which is strong and resistant to corrosion and strong clamping performance. Coated handle: the handle coated with plastic for better grip. Laser cutting, smooth hairless edge, the wrench snaps into the disc brake more smoothly. Top-rate quality: made of premium steel, which is sturdy, reliable and durable for long life. Easy to use: convenient design provides needed clearance to bend rotor both toward and away from spokes.
BrandWANGCL #ad
ManufacturerWANGCL #ad

4. WANGCL

#ad

Disc Correction Wrench Bicycle Disc Brake Rotor Truing Tool Bike Disc Brake Pads Adjusting Tool Bicycle Tools Brake Rotor Alignment Truing Fork for Bikes

#ad
WANGCL #ad - Comfort grip: the non-slip injections-molded grip makes our Bicycle Disc Brake Fork Tool easy and comfortable to grip. The small hole design also makes it can be easily hung on the rack or wall.

Easy carriage: small and lightweight. Specially designed and precisely manufactured. It can be used for a long time without easy deformation. Very smooth and textured. Exquisite craftsmanship: this stainless Steel Rotor Truing Fork is exquisitely crafted with a brushed appearance. High-class material: being made from high-quality stainless steel material, our Disc Correction Wrench is very sturdy and durable. Holding it for a long time does not hurt your hand. This bike disc Fork Tool can be easily carried anywhere. The rubber injection moulded grip is non-slip, comfortable and effortless to use.
BrandWANGCL #ad
ManufacturerWANGCL #ad
Height6.86 cm (2.7 Inches)
Length25.4 cm (10 Inches)
Weight0.01 kg (0.02 Pounds)
Width5.08 cm (2 Inches)
Part NumberCP019532
ModelCP019532

5. QKURT

#ad

QKURT Bike Disc Rotor Alignment Tool,Rotor Truing Fork Bicycle Brake Wrench for Bike Alignment

#ad
QKURT #ad - If you need it please don’t hesitate to add it to cart! More bike tools or outdoor sport goods are supply by qkurt shop. Top-rate quality: made of premium steel, which is sturdy, reliable and durable for long life.

100% satisfied after-sale service: if you received any defective or unsatisfied items please contact us directly, qkurt always provide no hassle return for customer. Easy to use: convenient design provides needed clearance to bend rotor both toward and away from spokes. Coated handle: the handle coated with plastic for better grip. Laser cutting, smooth hairless edge, the wrench snaps into the disc brake more smoothly. 3 openings: features 3 openings:15mm, 18mm, 42mm meet for different purpose use.
BrandQKURT #ad
ManufacturerQKURT #ad
Part NumberQK1045

6. TuoTu

#ad

TuoTu Bicycle Rotor Truing Fork with Multi Slots, Bike Disk Brake Rotor Alignment Tool

#ad
TuoTu #ad - Laser cuttingpanel and slots of disc brake rotor truing fork were laser cutted with frosted oxidized surface clean and sharp, specially designed and precisely manufactured to gently adjust bent or damaged bicycle disc brake rotors, the rubber coated grip with soft holding feeling.

Multi slotsthe disc brake rotor truing fork with totally 3 different slot depths for large and small adjustments from different angle, make sure you can done the job efficient and professional. Sizelength of the disc brake rotor truing fork about 7. 3 inch 185mm, the shortest slot about 06 inch 15mm, the deepest slot about 1 5/8 inch 42mm, width of the slots about 2.

5mm. Materialsthe bike disc brake rotor truing fork made of stainless steel with rubber coated grip, durable and tough enough. Warrantywe are confident with our product, we provide 2 years warranty for refund or replacement, for any quality problem or the tool not match your product, worry free !.
BrandTuoTu #ad
ManufacturerTuoTu #ad

7. BESPORTBLE

#ad

Disc Rotor Tool Bike Brake Disc Truing Tool, Bicycle Brake Discs Adjuster Flattening Correction Repair Tool 1Pcs, BESPORTBLE Rotor Truing Tool

#ad
BESPORTBLE #ad - Ideal for DIY work lovers. The adjustable wrench is made of stainless steel, which is strong and resistant to corrosion and strong clamping performance. Our tools are treated with high strength to increase strength and durability. Labor-saving, comfortable feel, convenient and practical. Versatile, suitable for home and professional use. A great gift for your friends and family.
BrandBESPORTBLE #ad
ManufacturerBESPORTBLE #ad
Height0.4 cm (0.16 Inches)
Length18.5 cm (7.28 Inches)
Width3.8 cm (1.5 Inches)
Part Number0115Z228BZ5MM
Model0115Z228BZ5MM

8. ZDYS

#ad

ZDYS Disc Rotor Truing Wrench,Bike Disc Rotor Truing Wrench Bicycle Brake Disc Adjuster Flattening Correction Repair Tool

#ad
ZDYS #ad - Smooth chamfering design: Smooth without burr, easy to make disc into the wrench. Easy to grip: plastic grip, comfortable feel, bright surface effect, more ergonomic. Surface drawing effect: The surface of the tool is brushed with strong texture. 3 opening adjustment Design: Corresponding to different use requirements. Easy to use: indicating the opening depth, high identification and wear resistant.
BrandZDYS #ad
ManufacturerZDYS #ad
Height3 cm (1.18 Inches)
Length15 cm (5.91 Inches)
Weight0.16 kg (0.35 Pounds)
Width10 cm (3.94 Inches)
Part Number16020786786009

9. Liseng

#ad

Liseng Bike Disc Brake Correction Wrench Brake Alignment Truing with Disc Brake Pads for Road Bike

#ad
Liseng #ad - Small size, light-weighted, easy to carry. Three opening design15mm/18mm/42mm corresponds to disc brake rotors and serves the of your rotors aligned. Made of steel material, sturdy, durable, surface injection, and corrosion resistant, . The ergonomic design, easy to and comfortable. Cutting, hairless, chamfer, the wrench snaps into the disc brake more smoothly.
BrandLiseng #ad
ManufacturerLiseng #ad
Height3 cm (1.18 Inches)
Length19 cm (7.48 Inches)
Width5 cm (1.97 Inches)
Part Number494867

10. N\A

#ad

NA Bike Brake Disc Rotor Truing Fork Bicycle Adjustment Tool Bike Bracket Removers Cycling Correction Wrench for Biking

#ad
N\A #ad - Unique designour brake rotor trimming fork adopts a double-ended design, and the openings at the two ends are different in size, which can be used for fine-tuning and large-scale adjustment.

Applicationour brake rotor trimming fork is a very practical bicycle repair tool, which can be used to adjust the brake disc. Sizethe size of our bicycle brake disc rotor trimming fork is 170*21*5mm, which is moderate in size and easy to use. Easy to usethe handle design of our brake rotor trimming fork is ergonomic, not easy to bend and deform, comfortable to hold, and will not be tired even if you use it for a long time. Materialour bicycle brake disc rotor trimming fork is made of high-quality stainless steel and plastic, not easy to be deformed, which is strong and durable, and not easy to rust.
BrandN\A #ad
ManufacturerWUTU #ad
Height17.5 cm (6.89 Inches)
Length1.2 cm (0.47 Inches)
Weight0.11 kg (0.24 Pounds)
Width6.1 cm (2.4 Inches)
Part Number81WZ
Model81WZ
WarrantyNo